New install. After my usual struggle to get driver working in new ibstallation today’s attempt finally works but super briefly. It started allowing playback for mere seconds before quitting. For some reason a few minutes might be allowed now but srillbstops before first song has end. Track forward button works but still doesn’t allow a full track to be played.
Hello @michael.anda,
Can you send me a copy of the “Debug Info”? You can get it in Audirvana Settings>General>Debug Info
Note: By clicking on the Debug Info button, Audirvana automatically copies all its content, all you have to do is paste it in response to this message
Audirvana 3.5.40
SIGNAL PROCESSING:
Polarity Inversion:
Globally: OFF
Per track: ON
Effects plugins NOT ACTIVE
UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66
AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF
LIBRARY SETTINGS:
Sync list: 0 folders
Library database path: C:\Users\micha\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite
ACTIVE STREAMING SERVICES
TIDAL: Connected as HIFI
=================== AUDIO DEVICE ========================
Max. memory for audio buffers: 732MB
Local Audio Engine:WASAPI
Preferred device:
Speakers (DENAFRIPS USB DAC)
Model UID:Speakers (DENAFRIPS USB DAC)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{1c50fe42-40f6-4739-9ed2-18b45c37bf01}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Active Sample Rate: 44.1kHz
Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF
Selected device:
Local audio device
Speakers (DENAFRIPS USB DAC) Manufacturer:
Model UID:Speakers (DENAFRIPS USB DAC) UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{1c50fe42-40f6-4739-9ed2-18b45c37bf01}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
12 available sample rates up to 1536000Hz
44100
48000
88200
96000
176400
192000
352800
384000
705600
768000
1411200
1536000
Volume Control
Physical: Yes
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to not MQA
DSD capability: Unhandled
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1
Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: No
1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 16bit little endian 44.1kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 44.1kHz
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 16bit little endian 48kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 48kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 16bit little endian 88.2kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 88.2kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 16bit little endian 96kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 96kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 16bit little endian 176.4kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 176.4kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 16bit little endian 192kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 192kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 16bit little endian 352.8kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 352.8kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 16bit little endian 384kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 384kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch Integer PCM 16bit little endian 705.6kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 705.6kHz
2 ch Integer PCM 32bit little endian 705.6kHz
2 ch Integer PCM 16bit little endian 768kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 768kHz
2 ch Integer PCM 32bit little endian 768kHz
2 ch Integer PCM 16bit little endian 1411.2kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 1411.2kHz
2 ch Integer PCM 32bit little endian 1411.2kHz
2 ch Integer PCM 16bit little endian 1536kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 1536kHz
2 ch Integer PCM 32bit little endian 1536kHz
Local devices found : 1
Device #0: Speakers (DENAFRIPS USB DAC) Manufacturer: Model UID: Speakers (DENAFRIPS USB DAC) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{1c50fe42-40f6-4739-9ed2-18b45c37bf01}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
UPnP devices found : 0
I took out my USB Disrupter and the problem ceased and desisted.
I had barely hit the ENTER key on my last response when the issue started up again.
Try to switch to ASIO. Disable MQA auto detection.
Thanks. I’ll look at that tomorrow.
ASIO and Master off doesn’t solve matters.
Try to make the preload buffer larger, something like 2048 or 4096 MB, depending on how much RAM you have.