Clicks and Ticks at maximum Upsampling rate

Hi everyone,

regardless of the source (Tidal and local files) there are clicks and ticks while playing back at maximum upsampling rate (32/384khz/DSD256) in connection with the ifi iOne DAC. At 32/192kHz/DSD128 these clicks are gone. My system is a Win10/1909.

Any advice is highly appreciated!

Thanks

Wolfgang

Please see the debug information below.

Audirvana 3.5.13

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX with device max frequency upsampling
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

LIBRARY SETTINGS:
Sync list: 1 folders
AUTO: E:\02_USERDATEN\Musik\Musik
Library database path: E:\02_USERDATEN\Musik\Musik\Audirvana\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
TIDAL: Connected as HIFI

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 64438MB

Local Audio Engine:ASIO 2 driver version 794

Preferred device:
iFi (by AMR) HD USB Audio
Model UID:iFi (by AMR) HD USB Audio
UID:iFi (by AMR) HD USB Audio

Active Sample Rate: 192kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF

Selected device:
Local audio device
iFi (by AMR) HD USB Audio Manufacturer:
Model UID:iFi (by AMR) HD USB Audio UID:iFi (by AMR) HD USB Audio

11 available sample rates up to 11289600Hz
44100
48000
88200
96000
176400
192000
352800
384000
2822400
5644800
11289600
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to MQA Renderer
DSD capability: Raw DSD (MSB)
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch DSD 8bit big endian in 8bit chunk 2822.4kHz
2 ch DSD 8bit big endian in 8bit chunk 5644.8kHz
2 ch DSD 8bit big endian in 8bit chunk 11289.6kHz

Local devices found : 1
Device #0: iFi (by AMR) HD USB Audio Manufacturer: Model UID: iFi (by AMR) HD USB Audio UID: iFi (by AMR) HD USB Audio

UPnP devices found : 0

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.