Lyngdorf MP60 2.1 not seeing Audirvana

Studio
1

Audirvana Studio 1.13.3 (11303)

macOS Version 12.4 (Build 21F79) with 8GB physical RAM

Connected account of : Charles Feathers

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
r8brain not in use
r8brain filter parameters
Bandwidth = 99.5%
Stop band attenuation 218dB
Phase linear

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: by album
SW volume control: ON

LIBRARY SETTINGS:
Sync list: 0 folders
iTunes/Music library synchronization: last synchronized on Wed May 25 09:40:03 2022

Library database path: /Users/charlesfeathers/Library/Application Support/Audirvana/AudirvanaDatabase.sqlite

Remote Control server:
Listening on 127.0.0.1 on port 49447

ACTIVE STREAMING SERVICES
TIDAL: Connected as PREMIUM

=================== AUDIO DEVICE ========================

CoreAudio audio path, buffer I/O frame size: 512

Max. memory for audio buffers: 1480MB
Exclusive access: Disabled
Integer mode: Enabled

Preferred device:
LYNGDORF MP-60-7C7438
Model UID:Lyngdorf MP-60
UID:uuid:a42c46b5-3c02-4945-bf51-88eeeaee110a

Active Sample Rate: 44.1kHz
Hog Mode is off

Bridge settings:
Sample rate limitation: 384kHz
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF

Selected device:
Local audio device
ID 0x2c Mac mini Speakers
Manufacturer: Apple Inc.
Model Name: Apple Inc. Mac mini Speakers
Model UID: Speaker
UID: BuiltInSpeakerDevice

4 available sample rates up to 96000Hz
44100
48000
88200
96000
Audio buffer frame size : 14 to 4096 frames
Current I/O buffer frame size : 512
Volume Control
Physical: Yes
Virtual: Yes
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to MQA Renderer
DSD capability: Unhandled
Device audio channels
Preferred stereo channels L:1 R:2
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1

Stream ID 0x2d 2 channels starting at 1
4 virtual formats:
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 96kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 88.2kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 48kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 44.1kHz

4 physical formats
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 96kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 88.2kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 48kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 44.1kHz

Local devices found : 1
Device #0: ID 0x2c Mac mini Speakers Manufacturer: Apple Inc. Model UID: Speaker UID: BuiltInSpeakerDevice Model Name: Apple Inc. Mac mini Speakers

UPnP devices found : 0

2

I don’t understand the problem exactly.

In your settings I see that Audirvana sees the Lyngdorf and identifies it as a DAC and also correctly identifies all the properties of your Lyngdorf. So you should be able to play music from Audirvana to your Lyngdorf. I see there are no UpnP devices detected, so I assume you have your Mac connected to the Lyngdorf with a USB connection?

Why do you want that the Lyngdorf sees Audirvana as well? There is no need for it. Or can’t you play music from Audirvana through the Lyngdorf? In that case have you checked on your Lyngdorf that it is set to the right input source?

Or am I missing something here?

Edit:
Sometimes I take posts too literally. I see now in posts below that it is solved :grinning:

3

Try to put exclusive access at ON
And Hog Mode at ON also and ser

2 Likes
4

Thanks, that brought back Lyngdorf as an output.

5

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.