How do you get rid off the annoying - “Syncing Audirvana DB” allways FLASHES on WIN10 ??
I have this issue, flashes every 3 secs.
I do have album art, cue files, notepad and database files in the synced folder, always have had yes.
Can you send me a copy of the “Debug Info”? You can get it in Audirvana Settings>General>Debug Info
Note: By clicking on the Debug Info button, Audirvana automatically copies all its content, all you have to do is paste it in response to this message.
Audirvana 3.5.40
SIGNAL PROCESSING:
Polarity Inversion:
Globally: OFF
Per track: ON
Effects plugins NOT ACTIVE
UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66
AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF
LIBRARY SETTINGS:
Sync list: 1 folders
AUTO: D:\Music
Library database path: D:\Music\Audirvana Database\AudirvanaPlusDatabaseV2.sqlite
ACTIVE STREAMING SERVICES
=================== AUDIO DEVICE ========================
Max. memory for audio buffers: 12732MB
Local Audio Engine:ASIO 2 driver version 1
Preferred device:
ASIO MADIface USB
Model UID:ASIO MADIface USB
UID:ASIO MADIface USB
Currently playing in Integer Mode:
Device: 2ch 8bits Integer, 2 bytes per frame 2822.4kHz
Active Sample Rate: 2822.4kHz
Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF
Selected device:
Local audio device
ASIO MADIface USB Manufacturer:
Model UID:ASIO MADIface USB UID:ASIO MADIface USB
13 available sample rates up to 11289600Hz
44100
48000
88200
96000
176400
192000
352800
384000
705600
768000
2822400
5644800
11289600
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to not MQA
DSD capability: Raw DSD (MSB)
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1
Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes
1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch Integer PCM 32bit little endian 705.6kHz
2 ch Integer PCM 32bit little endian 768kHz
2 ch DSD 8bit big endian in 8bit chunk 2822.4kHz
2 ch DSD 8bit big endian in 8bit chunk 5644.8kHz
2 ch DSD 8bit big endian in 8bit chunk 11289.6kHz
Local devices found : 5
Device #0: ASIO MADIface USB Manufacturer: Model UID: ASIO MADIface USB UID: ASIO MADIface USB
Device #1: Generic Low Latency ASIO Driver Manufacturer: Model UID: Generic Low Latency ASIO Driver UID: Generic Low Latency ASIO Driver
Device #2: Realtek ASIO Manufacturer: Model UID: Realtek ASIO UID: Realtek ASIO
Device #3: Topping USB Audio Device Manufacturer: Model UID: Topping USB Audio Device UID: Topping USB Audio Device
Device #4: xDuoo USB Audio Device Manufacturer: Model UID: xDuoo USB Audio Device UID: xDuoo USB Audio Device
UPnP devices found : 0
Your database and your music files are stored in the same oflder, this is why you have this constent refresh. To stop it you need to change the location of the database. By default it is located here:
C:\Users[your login]\AppData\Local\Audirvana\AudirvanaPlus
I have moved the AudirvanaPlusDatabaseV2.sqlite file to a location outside of the Music directory and the flashing has ceased. Thank you for your assistance 
Worked for me too , thanks
maybe check during initial setup for user ?