Tidal Autoplay is selected in Streaming Preferences but doesn’t kick in after an album from my local library played it’s last song. The function did work on Roon but after I switched to Audirvana I was not able to get it working.
I’m running Audirvana Studio v 2.2.5 on macOS 12.6.3. Monterey
Thanks for the feedback,
I did upgrade to 2.2.7 , unfortunately to no avail. I don’t use shuffle when playing my own albums. Autoplay doesn’t work no matter which album I play.
That’s strange tho, you may have already done this but, have you disconnected and reconnected your Tidal account from Audirvāna Studio?
Yes I did, also after the upgrade. Should a reinstall be considered, I just wanted to make sure that it all works before my trial periods are over.
You can reinstall it but it if it still doesn’t work, we will need to dig a little bit more so I can try to reproduce your issue.
Reinstall did not do it unfortunately
Is this what you’re looking for?
It’s correct that Autoplay doesn’t work if playing a song on an album with multiple tracks.
Unlike single track albums, Autoplay works normally.
This is from a local track, can you do the same from the same track I played from Tidal?
By default I play the whole album, not just a track…then I expect after playing the whole album that Tidal kicks in and continues with similar genre music.
Yes, from the album in Tidal, not Local. 
I got you!! So autoplay doesn’t work after playing one’s own album. So I misunderstood it’s function in Audirvana.
It does but in your case there is more involved here. It seems your tracks have not been analyzed by the software.
Can you send us a copy of the “Debug Info” when you have this issue? You can get it in Audirvana Settings>My account
Note: By clicking on the Debug Info button, Audirvana automatically copies all its content, all you have to do is paste it in response to this message
Hope this helps:
Audirvana Studio 2.2.7 (20208)
macOS 12.6.3 with 8GB physical RAM
Connected account of :
SIGNAL PROCESSING:
Polarity Inversion:
Globally: OFF
Per track: ON
Effects plugins NOT ACTIVE
UPSAMPLING:
r8brain not in use
r8brain filter parameters
Bandwidth = 99.5%
Stop band attenuation 218dB
Phase linear
AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF
LIBRARY SETTINGS:
Sync list: 1 folders
Manual: /Volumes/music/
iTunes/Music library synchronization: not synchronized
Library database path: /Users/egravenb02/Library/Application Support/Audirvana/AudirvanaDatabase.sqlite
Remote Control server:
Listening on 127.0.0.1 on port 50169
ACTIVE STREAMING SERVICES
TIDAL: Connected as PREMIUM
=================== AUDIO DEVICE ========================
Active method: Local
Max. memory for audio buffers: 5120MB
Local Audio Engine: CoreAudio
Exclusive access: ON
Integer mode: ON
Use max I/O buffer size: ON
Actual I/O buffer frame size: 512
Preferred device:
AudioQuest AudioQuest DragonFly Black v1.5
Model UID:AudioQuest DragonFly Black v1.5:21B4:0083
UID:AppleUSBAudioEngine:AudioQuest:AudioQuest DragonFly Black v1.5:AQDFBL0100030096:1
Active Sample Rate: 96kHz
Hog Mode is off
Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF
Selected device:Built-in Output
Manufacturer: Apple Inc.
Model name: Apple Inc. Built-in Output
Model UID: AppleHDA:126
UID: AppleHDAEngineOutput:1B,0,1,1:0
ID 0x31
4 available sample rates up to 96000Hz
44100
48000
88200
96000
Audio buffer frame size : 29 to 4096 frames
Current I/O buffer frame size : 512
Volume Control
Physical: No
Virtual: Yes
Max volume alert: Enabled
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to not MQA
DSD capability: Unhandled
Device audio channels
Preferred stereo channels L:1 R:2
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1
Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes
1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
Stream ID 0x32 2 channels starting at 1
4 virtual formats:
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 96kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 88.2kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 48kHz
2 ch Mixable linear PCM Interleaved 32 little endian Signed Float 44.1kHz
4 physical formats
2 ch Mixable linear PCM Interleaved 16 little endian Signed Integer 96kHz
2 ch Mixable linear PCM Interleaved 16 little endian Signed Integer 88.2kHz
2 ch Mixable linear PCM Interleaved 16 little endian Signed Integer 48kHz
2 ch Mixable linear PCM Interleaved 16 little endian Signed Integer 44.1kHz
Local devices found : 1
Device #0: ID 0x31 Built-in Output
Manufacturer: Apple Inc.
Model UID: AppleHDA:126
UID: AppleHDAEngineOutput:1B,0,1,1:0
Model name: Apple Inc. Built-in Output
UPnP
UPnP devices found : 0
Chromecast
Chromecast devices found : 1
Device #0: Shed TV
ID: 97285f4943d54fc10d888724d2f54c2b
Model name: Chromecast
Can you please remove this folder to be synced and add it again? After adding it, can you check if you have tracks with no Musicbrainz ID in the Metadata recovery section?
Work in Progress
Removed and reinitialised the music folder.
Over 8000 tracks with no MusicBrainz ID after 99% audio files analysed.
Result, Autoplay doesn’t work with local albums… only Tidal albums.