Upsampling dsd ne se termine pas

Bonjour,

après avoir effectué la mise à jour à la version 3.5.45, je rencontre un problème avec l’upsampling en DSD.
L’upsampling en DSD ne se termine pas et reste bloqué à quelques secondes avant la fin de la piste (voir capture écran ci-dessous).

Et par conséquence la lecture de la piste ne se termine pas non plus et le passage à la piste suivante doit être effectué manuellement.

Pas de problème avec les autres types de suréchantillonnage.
La lecture sans suréchantillonnage fonctionne correctement.

Avez-vous une solution à ce problème?

Ci-dessous la copie du debug info.

Audirvana 3.5.45

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX to DSD256 with filter type C
SoX filter parameters
Bandwidth at 0dB = 80.0476
Filter max length = 30000
Anti-aliasing = 100
Phase = 0

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

LIBRARY SETTINGS:
Sync list: 1 folders
AUTO: C:\Users\eric\Music
Library database path: C:\Users\eric\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 10272MB

Local Audio Engine:ASIO 2 driver version 794

Preferred device:
Haut-parleurs (iFi (by AMR) HD+ USB Audio)
Model UID:Haut-parleurs (iFi (by AMR) HD+ USB Audio)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{bcb39235-2687-4158-ac60-9d981cf71f70}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

Currently playing in Integer Mode:
Device: 2ch 8bits Integer, 2 bytes per frame 11289.6kHz

Active Sample Rate: 11289.6kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF

Selected device:
Local audio device
iFi (by AMR) HD USB Audio Manufacturer:
Model UID:iFi (by AMR) HD USB Audio UID:iFi (by AMR) HD USB Audio

11 available sample rates up to 11289600Hz
44100
48000
88200
96000
176400
192000
352800
384000
2822400
5644800
11289600
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: No
Not a MQA device, user set to not MQA
DSD capability: Raw DSD (MSB)
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch DSD 8bit big endian in 8bit chunk 2822.4kHz
2 ch DSD 8bit big endian in 8bit chunk 5644.8kHz
2 ch DSD 8bit big endian in 8bit chunk 11289.6kHz

Local devices found : 1
Device #0: iFi (by AMR) HD USB Audio Manufacturer: Model UID: iFi (by AMR) HD USB Audio UID: iFi (by AMR) HD USB Audio

UPnP devices found : 1
Device #0Décodeur TV UHD UID: uuid:00ababad-7947-1048-8a00-34db9c38b413 Location: http://192.168.1.11:42300/description.xml

Try reducing memory buffer in Audirvana to 2000mb around instead of 10272gb and see

Thank you @RunHomeSlow, but reducing memory buffer to 2000mb did not solve the problem.
But you’re right: in version 3.5.45 there is something wrong with memory buffer setting.

At 7913MB increasing the buffer makes it go from 22mn to 0mn.
The buffer never exceeds 22mn 30s even if I set it to 19GB.



There are 20GB of RAM on my computer and the OS is Windows 10 Pro 20H2 19042.867.

I have just noticed that playing back an album of only one track works fine.

Have the same issue. Song stops 4 seconds before the end. CAudirvana 3.5.45

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX to DSD512 with filter type B 8th order
SoX filter parameters
Bandwidth at 0dB = 90.007
Filter max length = 30000
Anti-aliasing = 100
Phase = 0

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

LIBRARY SETTINGS:
Sync list: 1 folders
AUTO: E:\backup-003836
Library database path: C:\Users\jeanf\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 4230MB

Local Audio Engine:ASIO 2 driver version 2

Preferred device:
T+A PDP3000 USB ASIO
Model UID:T+A PDP3000 USB ASIO
UID:T+A PDP3000 USB ASIO

Currently playing in Integer Mode:
Device: 2ch 8bits Integer, 2 bytes per frame 22579.2kHz

Active Sample Rate: 22579.2kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: ON

Selected device:
Local audio device
T+A PDP3000 USB ASIO Manufacturer:
Model UID:T+A PDP3000 USB ASIO UID:T+A PDP3000 USB ASIO

13 available sample rates up to 45158400Hz
44100
48000
88200
96000
176400
192000
352800
384000
2822400
5644800
11289600
22579200
45158400
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: No
Not a MQA device, user set to not MQA
DSD capability: Raw DSD (MSB)
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: Yes
Simple stereo device: Yes

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch DSD 8bit big endian in 8bit chunk 2822.4kHz
2 ch DSD 8bit big endian in 8bit chunk 5644.8kHz
2 ch DSD 8bit big endian in 8bit chunk 11289.6kHz
2 ch DSD 8bit big endian in 8bit chunk 22579.2kHz
2 ch DSD 8bit big endian in 8bit chunk 45158.4kHz

Local devices found : 2
Device #0: T+A PDP3000 USB ASIO Manufacturer: Model UID: T+A PDP3000 USB ASIO UID: T+A PDP3000 USB ASIO
Device #1: TEAC ASIO USB DRIVER Manufacturer: Model UID: TEAC ASIO USB DRIVER UID: TEAC ASIO USB DRIVER

UPnP devices found : 0

Bringing buffer to 2000 fixed it.

We have been able to reproduce the issue on our side. It appears that when the track is fully loaded and the next track is supposed to start being loaded but in fact it doesn’t with upsampling DSD. Can you try with a lower DSD upsampling value, for example with DSD 64, does it works?

Hello Damien,
I thought that the first song on DSD64 was going to be OK and it stopped 1 second before the end!
Audirvana 3.5.45

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX to DSD64 with filter type B 8th order
SoX filter parameters
Bandwidth at 0dB = 90.007
Filter max length = 30000
Anti-aliasing = 100
Phase = 0

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

LIBRARY SETTINGS:
Sync list: 1 folders
AUTO: E:\backup-003836
Library database path: C:\Users\jeanf\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 1980MB

Local Audio Engine:ASIO 2 driver version 2

Preferred device:
T+A PDP3000 USB ASIO
Model UID:T+A PDP3000 USB ASIO
UID:T+A PDP3000 USB ASIO

Currently playing in Integer Mode:
Device: 2ch 8bits Integer, 2 bytes per frame 2822.4kHz

Active Sample Rate: 2822.4kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: ON

Selected device:
Local audio device
T+A PDP3000 USB ASIO Manufacturer:
Model UID:T+A PDP3000 USB ASIO UID:T+A PDP3000 USB ASIO

13 available sample rates up to 45158400Hz
44100
48000
88200
96000
176400
192000
352800
384000
2822400
5644800
11289600
22579200
45158400
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: No
Not a MQA device, user set to not MQA
DSD capability: Raw DSD (MSB)
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: Yes
Simple stereo device: Yes

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch DSD 8bit big endian in 8bit chunk 2822.4kHz
2 ch DSD 8bit big endian in 8bit chunk 5644.8kHz
2 ch DSD 8bit big endian in 8bit chunk 11289.6kHz
2 ch DSD 8bit big endian in 8bit chunk 22579.2kHz
2 ch DSD 8bit big endian in 8bit chunk 45158.4kHz

Local devices found : 2
Device #0: T+A PDP3000 USB ASIO Manufacturer: Model UID: T+A PDP3000 USB ASIO UID: T+A PDP3000 USB ASIO
Device #1: TEAC ASIO USB DRIVER Manufacturer: Model UID: TEAC ASIO USB DRIVER UID: TEAC ASIO USB DRIVER

UPnP devices found : 0

I stop the playing. Press play and I get Error starting device playback!
Had to reboot 3 times to be able to play a song which did not go to the end and locked again. So frustrating.