Every few seconds Audirvana syncs the folder where I store my files, which in turn causes my hard drive to to make noise. It’s annoying since it’s right next to my listening chair. Is there some way to stop this from happening?
Hello @Guitar1,
Can you send me a copy of the “Debug Info” while it’s happening? You can get it in Audirvana Settings>General>Debug Info
Note: By clicking on the Debug Info button, Audirvana automatically copies all its content, all you have to do is paste it in response to this message
Audirvana 3.5.37
SIGNAL PROCESSING:
Polarity Inversion:
Globally: OFF
Per track: ON
Effects plugins NOT ACTIVE
UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66
AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF
LIBRARY SETTINGS:
Sync list: 1 folders
AUTO: C:\Users\fugue_000\Music\Hi Res
Library database path: C:\Users\fugue_000\Music\Hi Res\AudirvanaPlusDatabaseV2.sqlite
ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio
=================== AUDIO DEVICE ========================
Max. memory for audio buffers: 3362MB
Local Audio Engine:ASIO 2 driver version 802
Preferred device:
OPPO USB AUDIO 2.0 ASIO Driver
Model UID:OPPO USB AUDIO 2.0 ASIO Driver
UID:OPPO USB AUDIO 2.0 ASIO Driver
Currently playing in Integer Mode:
Device: 2ch 8bits Integer, 2 bytes per frame 2822.4kHz
Active Sample Rate: 2822.4kHz
Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF
Selected device:
Local audio device
OPPO USB AUDIO 2.0 ASIO Driver Manufacturer:
Model UID:OPPO USB AUDIO 2.0 ASIO Driver UID:OPPO USB AUDIO 2.0 ASIO Driver
14 available sample rates up to 22579200Hz
44100
48000
88200
96000
176400
192000
352800
384000
705600
768000
2822400
5644800
11289600
22579200
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to MQA Decoder
DSD capability: Raw DSD (MSB)
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1
Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes
1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch Integer PCM 32bit little endian 705.6kHz
2 ch Integer PCM 32bit little endian 768kHz
2 ch DSD 8bit big endian in 8bit chunk 2822.4kHz
2 ch DSD 8bit big endian in 8bit chunk 5644.8kHz
2 ch DSD 8bit big endian in 8bit chunk 11289.6kHz
2 ch DSD 8bit big endian in 8bit chunk 22579.2kHz
Local devices found : 2
Device #1: McIntosh-HD Manufacturer: Model UID: McIntosh-HD UID: McIntosh-HD
Device #2: OPPO USB AUDIO 2.0 ASIO Driver Manufacturer: Model UID: OPPO USB AUDIO 2.0 ASIO Driver UID: OPPO USB AUDIO 2.0 ASIO Driver
UPnP devices found : 1
Device #0OPPO UDP-205 UID: uuid:791cd940-1dd2-11b2-a690-af090711b1d6 Location: http://10.0.0.31:49152/dmr_oppo.xml
Your databse is located in the same folder as your synced music, this is why you get constent syncing, it will try to sync the change that have been made in your synced folder indefinitively. To get rid of this you need to move the database to a different location.
By default it is located here:
C:\Users[your login]\AppData\Local\Packages\Audirvana.Audirvana-[… id number that can vary]\LocalCache\Local\Audirvana\Audirvana
or
C:\Users[your login]\AppData\Local\Audirvana\Audirvana
Aha! Thank you very much.
This topic was automatically closed 375 days after the last reply. New replies are no longer allowed.