Audirvana don´t recognize DSD Compatibility of my Topping D50s

Audirvana doesn’t recognize the DSD compatibility of my Topping d50s DAC, I installed the driver and everything but the problem still, hope there is someone that could help me

Did you select dsd over pcm 1.0 or 1.1 (allow dsd256) in dac prefs

I cannot select anything because in the dac configuration it appears that it does not have compatibility

As Damien posted many times, can you post the debug info… maybe there is something there to see…

Can you send me a copy of the “Debug Info”? You can get it in Audirvana Settings>General>Debug Info

Note: By clicking on the Debug Info button, Audirvana automatically copies all its content, all you have to do is paste it in response to this message.

Audirvana 3.5.37

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX with 2x upsampling
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

LIBRARY SETTINGS:
Sync list: 0 folders
Library database path: C:\Users\seba_\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
TIDAL: Connected as HIFI

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 2414MB

Local Audio Engine:WASAPI

Preferred device:
Altavoces (TOPPING USB DAC)
Model UID:Altavoces (TOPPING USB DAC)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{efd5966a-acbd-411b-b9d7-603d24ff8056}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

Active Sample Rate: 44.1kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF

Selected device:
Local audio device
Altavoces (TOPPING USB DAC) Manufacturer:
Model UID:Altavoces (TOPPING USB DAC) UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{efd5966a-acbd-411b-b9d7-603d24ff8056}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

10 available sample rates up to 768000Hz
44100
48000
88200
96000
176400
192000
352800
384000
705600
768000
Volume Control
Physical: Yes
Virtual: No
MQA capability
Auto-detect MQA devices: No
Not a MQA device, user set to not MQA
DSD capability: Unhandled
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: No

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 16bit little endian 44.1kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 44.1kHz
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 16bit little endian 48kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 48kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 16bit little endian 88.2kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 88.2kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 16bit little endian 96kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 96kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 16bit little endian 176.4kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 176.4kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 16bit little endian 192kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 192kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 16bit little endian 352.8kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 352.8kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 16bit little endian 384kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 384kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch Integer PCM 16bit little endian 705.6kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 705.6kHz
2 ch Integer PCM 32bit little endian 705.6kHz
2 ch Integer PCM 16bit little endian 768kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 768kHz
2 ch Integer PCM 32bit little endian 768kHz

Local devices found : 2
Device #0: Altavoces (Realtek High Definition Audio) Manufacturer: Model UID: Altavoces (Realtek High Definition Audio) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{9f042cf2-053d-4c26-8e07-ca7e2ba34eea}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Device #1: Altavoces (TOPPING USB DAC) Manufacturer: Model UID: Altavoces (TOPPING USB DAC) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{efd5966a-acbd-411b-b9d7-603d24ff8056}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

UPnP devices found : 0

First i’ll set upsampling at OFF… second i’m on a Mac :slight_smile:
but i know there is 2 drivers for Windows usually … Wasapi and ASIO…
did you try the other?

Resolved! i updated windows and then tried to do the first thing you told me and now i can listen DSD Files, thank you!

Sorry to hijack this. I’m in the same boat here. Just got a Topping D50s, connected to my MacPro 2013 running Mojave, and just installed the trial Audirvana. I’m trying to play DSF and DFF files, which produce music but the Topping displays says it’s PCM and the Audirvana Audio Output selection says DSD not supported.

Have you tried to set DoP 1.0 or 1.1?

Hi there, in my case im using windows 10 and I need to change from wasapi to asio otherwise i cant reproude DSD and also select DSD over PCM

Thanks.
@bitracer - that option isn’t open/ changeable on either the desktop app or the android app.
@sebas_dro - yeah, I’m getting that from my reading too. I was just going to use an old mac mini to do the job, but I may have to install bootcamp on it for windows.
Cheers

By the way, is there a way to change the default view of the app please? I’ve organized my albums into alphabetical folders for clarity, but the app doesn’t seem to have an option to show a ‘folder view’.

You need to (re)install the drivers.

The default view when you open Audirvana is the where you’ve been in the app before closing it. About the folder view, we had a lot of request about it and we take it in consideration for a future update of Audirvana.