Audirvāna Origin 3.1.1 – Lumin X1 No Longer Detected via UPnP After Update

Hi @Antoine

After updating Audirvāna Origin to version 3.1.1, my Lumin X1 suddenly disappeared from the UPnP device list.

Before the update, the Lumin X1 was detected and worked normally. I have not intentionally changed anything in my network configuration or equipment. The problem appeared immediately after installing the new Audirvāna version.

I have already tried the following:

• Refreshed the network using the refresh button in the Network section of Audirvāna.

• Restarted my MacBook Pro.

• Restarted my Mac mini M2, which acts as my music server and hosts my music libraries.

Unfortunately, none of these steps brought the Lumin X1 back.

The Debug Info confirms that Audirvāna is using the Ethernet interface (en4), but reports “UPnP devices found: 0”. Interestingly, the Lumin X1 is still listed as the preferred device in the debug information, even though it is no longer discovered.

Since the problem started immediately after updating to version 3.1.1, I suspect that something in the new release may have affected UPnP device discovery.

Could you please investigate this issue?

In the meantime, would it be possible to send me a link to download the previous version of Audirvāna Origin? I would like to return to the working version until this issue has been resolved.

I sent the debug info by mail.

Thank you for your help.

Best regards,

Hi Antoine,

Many thanks for your quick response by mail. Yesterday I restored the previous version 3.1 from Time Machine, and it worked perfectly, just like before.

Something interesting happened today I launched version 3.1.1 again, and it actually detects the Lumin X1 and is working fine now…

Yesterday, I only used it with Origin 3.1. Since then, nothing else has happened except that I disconnected the external drives, turned off the Mac mini, and put the MacBook Pro to sleep for the night. (Mind you, yesterday after the issue occurred, I did the exact same thing: disconnected the drives, restarted the MacBook Pro, and restarted the Mac mini). So it is completely baffling and strange why 3.1.1 is working now…

For info. I still on rare occasions get the UPnP device discovery bug when restarting my mac. On rare occasions my Mac fails to identify UPnP devices. Opening system settings / privacy and security / local network then toggling off and on the Audirvana entry followed by closing and opening Audirvana solves the problem.

I think it is a time out issue when first starting or waking from sleep. I found this would occur when connecting my Mac via ethernet with wireless also turned on i.e the system was booting 2 network interfaces. The issue did not occur if I turned off one of the network interfaces (i.e I only connect the Macbook Pro now to the network via wireless)… For me it was a very rare occurrence resolved by only using 1 network interface on the mac running Audirvana…

I only use my ethernet fiber network

Same for me, used to connect via ethernet but wireless was turned on on the Mac but not connected when the issue occured. I had to either disable wireless (toggle off wireless) and connect via ethernet or disconnect the ethernet connection and solely connect via wireless to prevent the rare case of failure to identify UPnP devices. This suggested to me that on startup connection to UPnP devices timed out before the network interfaces were both initialised. Could be wrong however…