Coupures en cours et en fin de lecture fichiers qobuz hires

mon système d’écoute : pc portable lenovo ideapad 300 + dac FIIO Q3 + casque

étant très récent utilisateur d’Audirvana mais de longue date chez qobuz sublime, je souhaitais améliorer mon plaisir d’écoute avec audirvana mais je rencontre quelques difficultés en effet des interruptions apparaissent régulièrement : est-ce un pb de configuration ou autre ?
je vous joins la copie de debuginfo
Audirvana 3.5.45

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX with Power Of Two upsampling
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

LIBRARY SETTINGS:
Sync list: 2 folders
Manual: (OFFLINE) G:\Music
Manual: (OFFLINE) F:\Disque amovible
Library database path: C:\Users\velaidomestry\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Hi-Fi Sublime+

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 1966MB

Local Audio Engine:WASAPI

Preferred device:
Haut-parleurs (FiiO Q series)
Model UID:Haut-parleurs (FiiO Q series)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{835d2d30-9e40-4289-a943-62c028721a8b}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

Currently playing in Integer Mode:
Device: 2ch 32bits Integer, 8 bytes per frame 768kHz

Active Sample Rate: 768kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF

Selected device:
Local audio device
Haut-parleurs (FiiO Q series) Manufacturer:
Model UID:Haut-parleurs (FiiO Q series) UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{835d2d30-9e40-4289-a943-62c028721a8b}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

10 available sample rates up to 768000Hz
44100
48000
88200
96000
176400
192000
352800
384000
705600
768000
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: No
Not a MQA device, user set to not MQA
DSD capability: Unhandled
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: No

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 16bit little endian 44.1kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 44.1kHz
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 16bit little endian 48kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 48kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 16bit little endian 88.2kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 88.2kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 16bit little endian 96kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 96kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 16bit little endian 176.4kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 176.4kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 16bit little endian 192kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 192kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 16bit little endian 352.8kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 352.8kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 16bit little endian 384kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 384kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch Integer PCM 16bit little endian 705.6kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 705.6kHz
2 ch Integer PCM 32bit little endian 705.6kHz
2 ch Integer PCM 16bit little endian 768kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 768kHz
2 ch Integer PCM 32bit little endian 768kHz

Local devices found : 2
Device #0: Haut-parleurs (Conexant SmartAudio HD) Manufacturer: Model UID: Haut-parleurs (Conexant SmartAudio HD) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{73c668d0-daf4-46a0-95e9-e39dc3724b41}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Device #1: Haut-parleurs (FiiO Q series) Manufacturer: Model UID: Haut-parleurs (FiiO Q series) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{835d2d30-9e40-4289-a943-62c028721a8b}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

UPnP devices found : 0

merci de votre retour

Bonjour @victor,

Pouvez-vous désactiver le suréchantillonnage dans les paramètres audio d’Audirvana puis refaire un essai?

bonjour Damien,
merci pour votre réactivité, les choses se sont améliorées pour l’instant, cependant lorsqu’un morceau arrive en bout de piste, l’enchainement avec la piste suivante ne débute pas bien que le symbole du haut-parleur soit en regard qui la nouvelle piste qui semble bien se mettre en position de lecture; le téléchargement ne s’effectue pas même si on essaye de le réactiver

Audirvana 3.5.45

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

LIBRARY SETTINGS:
Sync list: 2 folders
Manual: (OFFLINE) G:\Music
Manual: (OFFLINE) F:\Disque amovible
Library database path: C:\Users\velaidomestry\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Hi-Fi Sublime+

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 1966MB

Local Audio Engine:WASAPI

Preferred device:
Haut-parleurs (FiiO Q series)
Model UID:Haut-parleurs (FiiO Q series)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{835d2d30-9e40-4289-a943-62c028721a8b}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

Currently playing in Integer Mode:
Device: 2ch 24bits Integer, 8 bytes per frame 96kHz

Active Sample Rate: 96kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF

Selected device:
Local audio device
Haut-parleurs (FiiO Q series) Manufacturer:
Model UID:Haut-parleurs (FiiO Q series) UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{835d2d30-9e40-4289-a943-62c028721a8b}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

10 available sample rates up to 768000Hz
44100
48000
88200
96000
176400
192000
352800
384000
705600
768000
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: No
Not a MQA device, user set to not MQA
DSD capability: Unhandled
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: No

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 16bit little endian 44.1kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 44.1kHz
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 16bit little endian 48kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 48kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 16bit little endian 88.2kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 88.2kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 16bit little endian 96kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 96kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 16bit little endian 176.4kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 176.4kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 16bit little endian 192kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 192kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 16bit little endian 352.8kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 352.8kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 16bit little endian 384kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 384kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch Integer PCM 16bit little endian 705.6kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 705.6kHz
2 ch Integer PCM 32bit little endian 705.6kHz
2 ch Integer PCM 16bit little endian 768kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 768kHz
2 ch Integer PCM 32bit little endian 768kHz

Local devices found : 2
Device #0: Haut-parleurs (Conexant SmartAudio HD) Manufacturer: Model UID: Haut-parleurs (Conexant SmartAudio HD) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{73c668d0-daf4-46a0-95e9-e39dc3724b41}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Device #1: Haut-parleurs (FiiO Q series) Manufacturer: Model UID: Haut-parleurs (FiiO Q series) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{835d2d30-9e40-4289-a943-62c028721a8b}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

UPnP devices found : 0

si on essaye de le réactiver pour la piste en question.
voilà le dernier debug info

Avez-vous essayé en ASIO au lieu de WASAPI?

pas d’amélioration en Asio, enchainement à la piste suivante toujours impossible; j’ai essayé d’aller sur d’autres pistes et de revenir sur la piste non enchainée : il y a des coupures dès le debut de lecture puis une demande de fermeture du programme.

Audirvana 3.5.45

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

LIBRARY SETTINGS:
Sync list: 2 folders
Manual: (OFFLINE) G:\Music
Manual: (OFFLINE) F:\Disque amovible
Library database path: C:\Users\velaidomestry\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Hi-Fi Sublime+

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 1966MB

Local Audio Engine:WASAPI

Preferred device:
Haut-parleurs (FiiO Q series)
Model UID:Haut-parleurs (FiiO Q series)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{835d2d30-9e40-4289-a943-62c028721a8b}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

Active Sample Rate: 192kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF

Selected device:
Local audio device
Haut-parleurs (Conexant SmartAudio HD) Manufacturer:
Model UID:Haut-parleurs (Conexant SmartAudio HD) UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{73c668d0-daf4-46a0-95e9-e39dc3724b41}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

4 available sample rates up to 192000Hz
44100
48000
96000
192000
Volume Control
Physical: Yes
Virtual: No
MQA capability
Auto-detect MQA devices: No
Not a MQA device, user set to not MQA
DSD capability: Unhandled
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: No

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 16bit little endian 44.1kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 44.1kHz
2 ch Integer PCM 16bit little endian 48kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 48kHz
2 ch Integer PCM 16bit little endian 96kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 96kHz
2 ch Integer PCM 16bit little endian 192kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 192kHz

Local devices found : 1
Device #0: Haut-parleurs (Conexant SmartAudio HD) Manufacturer: Model UID: Haut-parleurs (Conexant SmartAudio HD) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{73c668d0-daf4-46a0-95e9-e39dc3724b41}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

UPnP devices found : 0

Pouvez-vous fermer le programme lorsque cela arrive puis nous envoyer le fichier log et dmp à [email protected]?

Vous pouvez les trouver ici:
C:\Users[your login]\AppData\Local\Packages\Audirvana.Audirvana-[… id number that can vary]\LocalCache\Local\Audirvana\Audirvana