Moode device no longer recognized by Audirvana

I’ve been enjoying Qobuz/Audirvana for several weeks since purchasing both. Beginning 2 days ago, upon restarting my computer, Audirvana no longer brings up my Moode pi4 device. If I CMD prompt my device, the IP address is recognized in Windows and the network. I’m able to access Moode and play the web library of stations it has available. Multiple restarts have not resolved this issue. I have included the log . In Windows settings, other devices show the Moode UPNP is not connected.

Thanks

Audirvana 3.5.45

SIGNAL PROCESSING:

Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66

AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: by album
SW volume control: ON

LIBRARY SETTINGS:
Sync list: 0 folders
Library database path: C:\Users\user\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 1566MB

Local Audio Engine:WASAPI

Preferred device:
Speakers (Realtek High Definition Audio)
Model UID:Speakers (Realtek High Definition Audio)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{82beba49-d37a-4a83-90f7-3d801e80c5db}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

Active Sample Rate: 48kHz

Bridge settings:
Sample rate limitation: 192kHz
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: ON

Selected device:
Local audio device
Speakers (Realtek High Definition Audio) Manufacturer:
Model UID:Speakers (Realtek High Definition Audio) UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{82beba49-d37a-4a83-90f7-3d801e80c5db}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

4 available sample rates up to 192000Hz
44100
48000
96000
192000
Volume Control
Physical: Yes
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to not MQA
DSD capability: Unhandled
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: No

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 16bit little endian 44.1kHz
2 ch Integer PCM 20bit little endian aligned high in 32bit chunk 44.1kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 44.1kHz
2 ch Integer PCM 16bit little endian 48kHz
2 ch Integer PCM 20bit little endian aligned high in 32bit chunk 48kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 48kHz
2 ch Integer PCM 16bit little endian 96kHz
2 ch Integer PCM 20bit little endian aligned high in 32bit chunk 96kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 96kHz
2 ch Integer PCM 16bit little endian 192kHz
2 ch Integer PCM 20bit little endian aligned high in 32bit chunk 192kHz
2 ch Integer PCM 24bit little endian aligned high in 32bit chunk 192kHz

Local devices found : 2
Device #0: Speakers (Realtek High Definition Audio) Manufacturer: Model UID: Speakers (Realtek High Definition Audio) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{82beba49-d37a-4a83-90f7-3d801e80c5db}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Device #1: D32f-F1 (Intel® Display Audio) Manufacturer: Model UID: D32f-F1 (Intel® Display Audio) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{2f76a363-353c-44e7-bf24-26adf4f67ace}#{e6327cad-dcec-4949-ae8a-991e976a79d2}

UPnP devices found : 0

Thought I would explain what I found. When I opened the Moode app on my device, BUBBLEUPNP was listed in Renderers, but had been set of 'off". Can’t explain that because it all worked fine for 2 months. Anyway, I set BUUBLEUPNP to ‘on’ , restarted Renderers and all seems fine again.

Just an FYI

Thanks