Problem with stopped tracks

Hello. I use audirvana on windows 10 for usb to DAC and I have a problem. after a few songs played, it stops as if the playlist has ended, although I know it definitely doesn’t stop after the last song. someone had a similar problem and solved it? Thx

Are you upsampling? Try without upsampling if you do.

No, i don’t use upsampling becase with upsampling i hear shoot in speaker.

Hello @majcher87,

Can you send me a copy of the “Debug Info”? You can get it in Audirvana Settings>General>Debug Info

Note: By clicking on the Debug Info button, Audirvana automatically copies all its content, all you have to do is paste it in response to this message

Audirvana 3.5.42


Polarity Inversion:
	Globally: OFF
	Per track: ON
Effects plugins NOT ACTIVE

SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66

Max allowed volume: 100
Replay Gain: None
SW volume control: OFF

Sync list: 1 folders
AUTO: E:\Muzyka
Library database path: C:\Users\majch\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite

TIDAL: Connected as HIFI

=================== AUDIO DEVICE ========================

Max. memory for audio buffers: 2090MB

Local Audio Engine:ASIO 2 driver version 536

Preferred device:

Model UID:

Active Sample Rate: 44.1kHz

Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF

Selected device:
Local audio device
TUSBAudio ASIO Driver Manufacturer:
Model UID:TUSBAudio ASIO Driver UID:TUSBAudio ASIO Driver

11 available sample rates up to 11289600Hz
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to MQA Renderer
DSD capability: Raw DSD (MSB)
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1

Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes

1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch DSD 8bit big endian in 8bit chunk 2822.4kHz
2 ch DSD 8bit big endian in 8bit chunk 5644.8kHz
2 ch DSD 8bit big endian in 8bit chunk 11289.6kHz

Local devices found : 2
Device #0: TUSBAudio ASIO Driver Manufacturer: Model UID: TUSBAudio ASIO Driver UID: TUSBAudio ASIO Driver
Device #1: XMOS USB Audio 2.0 ST 3033 Manufacturer: Model UID: XMOS USB Audio 2.0 ST 3033 UID: XMOS USB Audio 2.0 ST 3033

UPnP devices found : 1
Device #0[TV] tv majcher UID: uuid:baa3c1e0-6abd-48fc-ad78-f6995e34975a Location:

today i play four tracks and audirvana stop play

How much memory(RAM) you have in your computer?

Damien3 i got 8gb ram in nuc i7

Can you go in the audio output settings and change the maximum memory for audio buffer to 4000MB? If you still have the issue, can you try using WASAPI instead of ASIO?

yes i can change buffor and i try it later. In wasapi i dont have option native dsd only dop :frowning:

It’s true but you were playing a 44,1 Khz track when you had the issue, right?

yes it’s true, for try i can change it, but i prefered asio because i play dsd too.

Damien3, nadal jest to samo, mimo zmiany bufora i asio/wasapi. Proszę o pomoc by audirvana działała bez przerw.

When you change from a track to another, does they have the same sample rate and bit depth?

it happens during one album (stops by itself) so all parameters should theoretically be the same

This topic was automatically closed 375 days after the last reply. New replies are no longer allowed.