When playing DSD files or changing from one DSD track to the next I will sometimes get an a Mini dump file and the track stops playing and it produces a loud pulsating sound. Can someone help?
Hello @Hchavez78, Can you send me a copy of the “Debug Info” while you are connected to your DAC? You can get it in Audirvana Settings>General>Debug Info
Note: By clicking on the Debug Info Audirvana button automatically copies all its content, all you have to do is paste it in response to this message
Audirvana 3.5.3
SIGNAL PROCESSING:
Polarity Inversion:
Globally: OFF
Per track: ON
Effects plugins NOT ACTIVE
UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66
AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF
LIBRARY SETTINGS:
Sync list: 1 folders
AUTO: D:\Music\Acoustic Sounds Super HiRez
Library database path: C:\Users\Eddie\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite
ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio
=================== AUDIO DEVICE ========================
Max. memory for audio buffers: 7798MB
Local Audio Engine:ASIO 2 driver version 1035
Preferred device:
XMOS USB Audio 2.0 ST 306A
Model UID:XMOS USB Audio 2.0 ST 306A
UID:XMOS USB Audio 2.0 ST 306A
Active Sample Rate: 192kHz
Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: ON
Selected device:
Local audio device
XMOS USB Audio 2.0 ST 306A Manufacturer:
Model UID:XMOS USB Audio 2.0 ST 306A UID:XMOS USB Audio 2.0 ST 306A
9 available sample rates up to 705600Hz
44100
48000
88200
96000
176400
192000
352800
384000
705600
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to not MQA
DSD capability: DSD via PCM 1.1
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1
Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes
1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch Integer PCM 32bit little endian 705.6kHz
Local devices found : 6
Device #0: ASIO4ALL v2 Manufacturer: Model UID: ASIO4ALL v2 UID: ASIO4ALL v2
Device #1: DSD Transcoder (DoP/Native) Manufacturer: Model UID: DSD Transcoder (DoP/Native) UID: DSD Transcoder (DoP/Native)
Device #2: Focusrite USB ASIO Manufacturer: Model UID: Focusrite USB ASIO UID: Focusrite USB ASIO
Device #3: JPLAY Driver Manufacturer: Model UID: JPLAY Driver UID: JPLAY Driver
Device #4: JRiver Media Center 25 Manufacturer: Model UID: JRiver Media Center 25 UID: JRiver Media Center 25
Device #5: XMOS USB Audio 2.0 ST 306A Manufacturer: Model UID: XMOS USB Audio 2.0 ST 306A UID: XMOS USB Audio 2.0 ST 306A
UPnP devices found : 1
Device #0JPLAY FEMTO UID: uuid:JPLAY192.168.1.14-MediaRenderer Location: http://192.168.1.14:48167/JPLAY192.168.1.14-MediaRenderer/Upnp/device.xml
Hello @Hchavez78, thank you for the debug info. Can you change your Audio settings to “DSD via PCM 1.0” and change the maximum amount of memory for audio to 3000MB? you can do that here:
Audirvana 3.5.3
SIGNAL PROCESSING:
Polarity Inversion:
Globally: OFF
Per track: ON
Effects plugins NOT ACTIVE
UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66
AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: OFF
LIBRARY SETTINGS:
Sync list: 1 folders
AUTO: D:\Music\Acoustic Sounds Super HiRez
Library database path: C:\Users\Eddie\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite
ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio
=================== AUDIO DEVICE ========================
Max. memory for audio buffers: 3004MB
Local Audio Engine:ASIO 2 driver version 1035
Preferred device:
XMOS USB Audio 2.0 ST 306A
Model UID:XMOS USB Audio 2.0 ST 306A
UID:XMOS USB Audio 2.0 ST 306A
Active Sample Rate: 705.6kHz
Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: ON
Selected device:
Local audio device
XMOS USB Audio 2.0 ST 306A Manufacturer:
Model UID:XMOS USB Audio 2.0 ST 306A UID:XMOS USB Audio 2.0 ST 306A
9 available sample rates up to 705600Hz
44100
48000
88200
96000
176400
192000
352800
384000
705600
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to not MQA
DSD capability: DSD via PCM 1.0
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1
Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: Yes
1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 192kHz
2 ch Integer PCM 32bit little endian 352.8kHz
2 ch Integer PCM 32bit little endian 384kHz
2 ch Integer PCM 32bit little endian 705.6kHz
Local devices found : 6
Device #0: ASIO4ALL v2 Manufacturer: Model UID: ASIO4ALL v2 UID: ASIO4ALL v2
Device #1: DSD Transcoder (DoP/Native) Manufacturer: Model UID: DSD Transcoder (DoP/Native) UID: DSD Transcoder (DoP/Native)
Device #2: Focusrite USB ASIO Manufacturer: Model UID: Focusrite USB ASIO UID: Focusrite USB ASIO
Device #3: JPLAY Driver Manufacturer: Model UID: JPLAY Driver UID: JPLAY Driver
Device #4: JRiver Media Center 25 Manufacturer: Model UID: JRiver Media Center 25 UID: JRiver Media Center 25
Device #5: XMOS USB Audio 2.0 ST 306A Manufacturer: Model UID: XMOS USB Audio 2.0 ST 306A UID: XMOS USB Audio 2.0 ST 306A
UPnP devices found : 1
Device #0JPLAY FEMTO UID: uuid:JPLAY192.168.1.14-MediaRenderer Location: http://192.168.1.14:48167/JPLAY192.168.1.14-MediaRenderer/Upnp/device.xml
Have you also tried to reinstall your ASIO driver?
I have not, but I will try.
I reinstalled drivers and problem still exist. I tested playing my DSD files thru Foobar and it worked without a problem. Audirvana continues to have the same problem. There is also an audible pop when changing DSD tracks on Audirvana.
Any other suggestions?
I reinstalled drivers and problem still exist. I tested playing my DSD files thru Foobar and it worked without a problem. Audirvana continues to have the same problem. There is also an audible pop when changing DSD tracks on Audirvana.
Well, it might be a little worse. Lol
I have noticed that it seems to happen more with 128dsd and 256dsd. If that helps you any.
Hopefully you can fix the problem, I really like the interface of Audirvana.
Thanks
@Antoine, Is it possible to get a refund for the software? I have not been able to use the software with the DSD glitch.I am affraid to use it as that sound that it makes when the error happens is pretty loud.
@Antoine, It’s great that you have released all these updates, but my issue still persists. Especially when changing from one DSD track to another.
3.5.11 didn’t fix the problem either.
@Antoine, Im not sure I understand your question. The audio output device in windows or in Audirvana?