Do you have the same behavior if you select Haut-parleurs / écouteurs ?
Hi Damien,
Exactly the same behavior with any other output.
kr,
Stéphane
Hi Damien,
Any news by any chance ?
Stéphane
New user here and I also have the same problem of not being able to play songs continuously when they are in resolutions of 24/96 or 24/192. Here is my debug info;
Audirvana 3.5.45
SIGNAL PROCESSING:
Polarity Inversion:
Globally: OFF
Per track: ON
Effects plugins NOT ACTIVE
UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66
AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: ON
LIBRARY SETTINGS:
Sync list: 2 folders
AUTO: C:\Users\mstil\Music
AUTO: E:\Music
Library database path: C:\Users\mstil\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite
ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio
=================== AUDIO DEVICE ========================
Max. memory for audio buffers: 1988MB
Local Audio Engine:WASAPI
Preferred device:
Speakers (Schiit Modi 3)
Model UID:Speakers (Schiit Modi 3)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{4bf25be4-0597-4ccf-8ede-447499143e3a}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Active Sample Rate: 48kHz
Bridge settings:
Sample rate limitation: 192kHz
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF
Selected device:
Local audio device
Speakers (Schiit Modi 3) Manufacturer:
Model UID:Speakers (Schiit Modi 3) UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{4bf25be4-0597-4ccf-8ede-447499143e3a}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
6 available sample rates up to 192000Hz
44100
48000
88200
96000
176400
192000
Volume Control
Physical: No
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to not MQA
DSD capability: DSD via PCM 1.0
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1
Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: No
1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 16bit little endian 44.1kHz
2 ch Integer PCM 24bit little endian 44.1kHz
2 ch Integer PCM 32bit little endian 44.1kHz
2 ch Integer PCM 16bit little endian 48kHz
2 ch Integer PCM 24bit little endian 48kHz
2 ch Integer PCM 32bit little endian 48kHz
2 ch Integer PCM 16bit little endian 88.2kHz
2 ch Integer PCM 24bit little endian 88.2kHz
2 ch Integer PCM 32bit little endian 88.2kHz
2 ch Integer PCM 16bit little endian 96kHz
2 ch Integer PCM 24bit little endian 96kHz
2 ch Integer PCM 32bit little endian 96kHz
2 ch Integer PCM 16bit little endian 176.4kHz
2 ch Integer PCM 24bit little endian 176.4kHz
2 ch Integer PCM 32bit little endian 176.4kHz
2 ch Integer PCM 16bit little endian 192kHz
2 ch Integer PCM 24bit little endian 192kHz
2 ch Integer PCM 32bit little endian 192kHz
Local devices found : 2
Device #0: Speakers (Realtek® Audio) Manufacturer: Model UID: Speakers (Realtek® Audio) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{ba0d64ef-2cf0-46d2-a8a8-04cb7ebac799}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Device #1: Speakers (Schiit Modi 3) Manufacturer: Model UID: Speakers (Schiit Modi 3) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{4bf25be4-0597-4ccf-8ede-447499143e3a}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
UPnP devices found : 0
Now it won’t play Qobuz in high res at all. I can only play in 16/44 no matter what settings I use. Here is the debug info:
Audirvana 3.5.45
SIGNAL PROCESSING:
Polarity Inversion:
Globally: OFF
Per track: ON
Effects plugins NOT ACTIVE
UPSAMPLING:
SoX not in use
SoX filter parameters
Bandwidth at 0dB = 99.5
Filter max length = 30000
Anti-aliasing = 100
Phase = 66
AUDIO VOLUME:
Max allowed volume: 100
Replay Gain: None
SW volume control: ON
LIBRARY SETTINGS:
Sync list: 2 folders
AUTO: C:\Users\mstil\Music
AUTO: E:\Music
Library database path: C:\Users\mstil\AppData\Local\Audirvana\AudirvanaPlus\AudirvanaPlusDatabaseV2.sqlite
ACTIVE STREAMING SERVICES
Qobuz: Connected as Qobuz Studio
=================== AUDIO DEVICE ========================
Max. memory for audio buffers: 1988MB
Local Audio Engine:WASAPI
Preferred device:
Headphones (REIYIN Audio DA-02)
Model UID:Headphones (REIYIN Audio DA-02)
UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{f33a3f19-6114-4ad7-b8ea-9e33cd563163}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Active Sample Rate: 192kHz
Bridge settings:
Sample rate limitation: none
Sample rate switching latency: none
Limit bitdepth to 24bit: OFF
Mute during sample rate change: OFF
Selected device:
Local audio device
Headphones (REIYIN Audio DA-02) Manufacturer:
Model UID:Headphones (REIYIN Audio DA-02) UID:\?\SWD#MMDEVAPI#{0.0.0.00000000}.{f33a3f19-6114-4ad7-b8ea-9e33cd563163}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
4 available sample rates up to 192000Hz
44100
48000
96000
192000
Volume Control
Physical: Yes
Virtual: No
MQA capability
Auto-detect MQA devices: Yes
Not a MQA device, user set to not MQA
DSD capability: DSD via PCM 1.0
Device audio channels
Preferred stereo channels L:0 R:1
Channel bitmap: Ox3, layout:
Channel 0 mapped to 0
Channel 1 mapped to 1
Audio channels in use
Number of channels: 2
Use as stereo device only: No
Simple stereo device: No
1 output streams:
Number of active channels: 2, in 1 stream(s)
Channel #0 :Stream 0 channel 0
Channel #1 :Stream 0 channel 1
2 ch Integer PCM 16bit little endian 44.1kHz
2 ch Integer PCM 24bit little endian 44.1kHz
2 ch Integer PCM 16bit little endian 48kHz
2 ch Integer PCM 24bit little endian 48kHz
2 ch Integer PCM 16bit little endian 96kHz
2 ch Integer PCM 24bit little endian 96kHz
2 ch Integer PCM 16bit little endian 192kHz
2 ch Integer PCM 24bit little endian 192kHz
Local devices found : 2
Device #0: Headphones (REIYIN Audio DA-02) Manufacturer: Model UID: Headphones (REIYIN Audio DA-02) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{f33a3f19-6114-4ad7-b8ea-9e33cd563163}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
Device #1: Speakers (Realtek® Audio) Manufacturer: Model UID: Speakers (Realtek® Audio) UID: \?\SWD#MMDEVAPI#{0.0.0.00000000}.{ba0d64ef-2cf0-46d2-a8a8-04cb7ebac799}#{e6327cad-dcec-4949-ae8a-991e976a79d2}
UPnP devices found : 0
Do you have the same issue when you select Speakers (Realtek® Audio) ?
Yes, but the speakers are limited to 16/48. I also checked it when I plug headphones into the laptop directly and have the same problem even though it should be able to handle 24/48.
Thank you.
Bonjour Damien,
même problème pour moi depuis la dernière MAJ. En streaming le passage au second titre ne se fait pas. Arrêt à la fin du premier,. Lancement manuel obligé de la seconde plage.
Les changements de plages suivantes se font normalement.
Très enquiquinant !
ça ne le fait pas avec la lecture de mes CDs rippés, ni avec le lecteur de Qobuz.
(Windows 10, V 3.5.45)
Bonjour,
J’ai le même problème depuis maintenant 4 semaines, mise à jour 3.5.45 sous Windows 10.
Du coup, j’ai abandonné le steaming qobuz ou Tidal, et j’écoute exclusivement mes fichiers locaux qui fonctionnent bien.
En espérant qu’une solution sera trouvé pour les utilisateurs de tidlala ou qobuz mais je comprend la frustration des utilisateurs.
Please, if this cannot be fix immediately just roll back to the previous version that worked. This has gone on too long and our listening experience is ruined.
1 Like
et ça ruine aussi la réputation d’Audirvana …!!!
2 Likes
Bonjour,
depuis quelques jours j’ai le même problème,
à la différence que la lecture se bloque en plein morceau.
I was able to resolve this - it was the setting in the “Streaming Qobuz account” area that had gotten set to “lossy”. Not sure how that happened, but it plays high res now.
Pour info,
passé la lecture du premier morceau de musique,
le second s’affiche avec la durée du premier puis
se bloque avant le lancement du 3ème…
It is really strange - there are some albums that run always without problems. But most do not. Don’t know what the difference would be. eg. The Album from Raphael feuillatre - Guitar Recital. runs always smoothly through. Other albums also with 44.1 kHz not. hm.
Is there a way to just get a link to the old version where everything runs smoothly. It is not acceptable having the best stereo system of the world here - and being not able to hear music since month. The whole concept of my system is based on Audirvana…
Hello @Radiohead,
So the track goes from one to the other properly after you have changed this setting?
Sometimes it does some times it doesn’t play through. I’ll experiment with it more today and see if I can provide more detail on when it works and when it doesn’t.
From : Damien3
Hello Everyone,
I’m sorry for this situation and the frustration you have around it. It’s really really difficult for us to find the reason why you have this issue and we need to make more investigation about it.
That being said for those who have the issue, you can find the older version fo Audirvana 3.5 below but make sure it look at the procedure below if you do not want to loose any of your Favorites/playlist from Audirvana:
Before installing this older version, make sure you have made a back up of your AudirvanaPlusDatabaseV2.sqlite file.
You should find it here:
C:\Users[your login]\AppData\Local\Packages\Audirvana.Audirvana-[… id number that can vary]\LocalCache\Local\Audirvana\AudirvanaPlus
After you have made the back up, uninstall your version in the Windows 10 settings in the App section.
Her is the link:
https://audirvana.com/delivery/windows/AudirvanaSetup_3.5.44.0_Test/AudirvanaSetup_3.5.44.0_x64.appxbundle
I experimented some more today and what I find is that songs that are high res and over approximately 5 minutes long will not advance to the next song when they are the first song played - either first song on an album or the first song you play in a playlist (i.e., could be in the middle of the playlist). Songs that are standard resolution or under about 5 minutes seem to play through ok.
1 Like
Salut Damien,
même problème après installation
de la version précédente d’Audirvana:
suite à la lecture d’un premier morceau,
le second commence avec le nom et la durée du premier,
puis se fige avant la lecture du 3ème…
1 Like